Changing Your Station Passcode; In/Out Of Group; Locking Your Station - Samsung OfficeServ ITP-5121D User Manual
Ip keyset
Hide thumbs
Also See for OfficeServ ITP-5121D:
- User manual (94 pages) ,
- Quick reference manual (8 pages) ,
- User instructions (368 pages)
Table of Contents
Advertisement
To enter an account code after the outside party hangs up.
•
After the outside party hangs up, hookflash, receive confirmation tone and
then dial 47.
Dial the account code (it may be a maximum of 12 characters including ,
•
and #).
NOTE: If you wait for the outside party to hang up, you must complete this proce-
dure within ten seconds. You cannot repeat if you make a mistake.
IN/OUT OF GROUP
If your station is assigned to a hunt group, this feature will allow you to dial an
access code plus the group number, e.g., 501, plus 0 to temporarily prevent your
station from receiving any group calls. You will still be able to receive calls that are
dialed directly to your station. To reenter the group, dial an access code plus the
group number, e.g., 501, plus 1.
LOCKING YOUR STATION
0
UNLOCKED
Make outside calls
YES
Receive outside calls
YES
Make intercom calls
YES
Receive intercom calls
YES
Make 911 calls
YES
To lock your phone from making outgoing calls:
•
Lift handset to go offhook and dial 15100 plus your station passcode
(default 1234) then dial 1.
•
Listen for system dial tone and replace handset. Your station is now locked
from making outgoing calls.
Note*: When 911 is programmed, 911 emergency dialing is allowed for a LOCKED
OUTGOING station.
1
2
LOCKED OUTGOING
LOCKED ALL CALLS
Hold Button LED Flashes
Hold Button LED Solid
NO (ACCESS DENIED)
NO
YES
NO
YES
NO
YES
NO
YES*
NO
To lock your station from making both internal and outgoing calls:
•
Lift handset to go offhook and dial 15100 plus your station passcode
(default 1234) then dial 2.
•
Listen for system dial tone and replace handset. Your station is now locked
from making both internal and outgoing calls.
To unlock your phone:
•
Lift handset to go offhook and dial 15100 plus your station passcode
(default 1234) then dial 0.
•
Listen for system dial tone and replace handset. Your station is now
unlocked.
CHANGING YOUR STATION
PASSCODE
To change your station user passcode:
•
Lift handset to go offhook then dial 15101
•
Then dial your existing station passcode
•
Then dial a new passcode (must be four digits)
•
Listen for confirmation tone then replace the handset
19
20
Home Page
Table of Contents
STD Telephone
Hide quick links:
Advertisement
Chapters
Table of Contents
