Setting Your Answer Mode - Samsung OfficeServ SMT-i5243 User Manual

OfficeServ 7030
TECHNICAL MANUAL

1.5 SETTING YOUR ANSWER MODE

Each keyset can have its answer mode for intercom calls set to one of the following options:
RING MODE—The station will ring in one of eight custom ring patterns. Calls are answered by
pressing the ANS/RLS key or lifting the handset.
AUTO ANSWER MODE—After giving a short attention tone, the station will automatically
answer calls on the speakerphone. When a C.O. line is transferred to a station in Auto Answer,
the screened portion of the call will be Auto Answer, but the keyset will ring when the transfer
is complete if the user has not pressed the ANS/RLS key or lifted the handset.
VOICE ANNOUNCE—The station will not ring. After a short attention tone, callers can make an
announcement. The called party must press the ANS/RLS key or lift the handset to reply.
ACTION
1. Press the transfer key followed by 103
Display shows
2. Dial 0, 1 or 2 to change the ring mode, e.g., 2
OR
Press UP or DOWN to select the ring mode
3. Press the transfer key to store and exit
DISPLAY
[201] ANS MODE
RING MODE
[201] ANS MODE
VOICE ANNOUNCE
1.8
Home Page
USER INSTRUCTIONS
PART 1 MAY 2010