SECTION 5.
OFFICESERV™ 7000
SYSTEM FEATURES
38
OUTSIDE CALLS
MAKING CALLS FROM AOM
Note: When making calls, internal or outside calls, in order to access the program-
mable button screens, press the AOM soft button. Then you can utilize the
Navigation button to scroll the list.
•
When the desired number is highlighted, press the OK button.
•
The number will be automatically dialed.
UNIVERSAL ANSWER
Outside lines may be programmed to ring a general alerting device. To answer
calls ringing this device, dial 67—OR—press the UA button. This device can oper-
ate in any one of the six different ring plans.
NOTE: If the Hot Keypad feature has been turned off, you must first lift the handset
or press the Speaker button before dialing.
RECALL DIAL TONE
•
Press the New button to disconnect your existing call, wait for dial tone and
then make a new call on the same line.
NOTE: If this button does not appear on your keyset, the Flash button may be pro-
grammed to recall dial tone.
SENDING A FLASH
While on an outside call, press the Flash button to send a flash to the telephone
company. This is required for some custom calling features or CENTREX use.
NOTE: Flash is not available on an ISDN circuit.
BUSY LINE QUEUING WITH CALLBACK
If you receive a busy signal when you are selecting an outside line, this means that
the line or group of lines is busy.
•
Press the Callback button, if programmed, or dial 44, you will hear confirma-
tion tone.
•
Hang up or press Speaker button.
•
When the line becomes free, the system will call you back.
•
Lift the handset or press the Speaker button to answer, wait for dial tone and
dial the telephone number or speed dial number again.
Home Page
39