Table of Contents
Advertisement
SETTING IP MANUALLY
•
On [4. Setting Network Information] screen, set the Network Mode (exam-
ple Static). Enter the station IP address (192.xxx.x.195), Gateway (192.xxx.x.1),
and Subnet mask (255.255.255.0).
•
Press Next soft button to skip [5. Setting VLAN].
•
Press Next soft button to skip [6. Setting 802.1x].
•
Press the Done soft button to complete the setup.
•
Press the Yes soft button the complete the installation and reboot the phone.
SETTING UP EXTENSION LOGIN
Hot Desking allows you to log in and out of your SMT-i5243 IP keyset without
rebooting.
•
Press the Menu soft button, scroll to Phone soft button.
•
Scroll to Phone Information and press OK button.
•
Enter the administrator's password (please contact your phone system admin-
istrator).
•
Scroll to Extension Login then press OK button.
•
Choose the ON option and press OK button. (Note: ON to allow, OFF to deny
hot desking).
•
Press the OK button then Save soft button to complete the setup.
•
When the phone restarts, enter the ID (eg; extension 2809) and password.
•
Press the Login soft button to complete the login.
16
CONFIGURATION MENU STRUCTURE
This menu is for administrator use and requires a password. The Configuration
Menu options are as follows:
1. EASY INSTALL
2. PHONE INFORMATION
[HOT DESKING]
3. NETWORK
4. SERVER
5. EXTENSION LOGIN
6. VIDEO OPTION (OPTIONAL)
7. SOFTWARE UPGRADE
8. FACTORY RESET
9. PHONE RESTART
This option will guide you through setting up all required parameters for con-
necting the SMT keyset to your system.
1.
Version Info: Provides boot rom, software, DSP, and hardware version
information.
2.
Network Info: Displays network mode, IP address of phone, network, and
gateway information.
3.
MAC Address
Displays Static IP, Dynamic IP, PPPoE, NAT, 802.1x, VLAN (LAN), and VLAN (PC).
1.
Primary System: The main processor's IP address.
2.
System 1~3: Up to 4 server IPs can be set.
Allows the user to choose the option of permitting the phone either
login/logout from idle mode or only register to the server on power up. Once
the phone is placed into Extension Login mode, a display will show up to allow
you to enter any valid User ID and password. This function is also referred to
as hot desking (idle login).
This option is used to set video parameters for using video phone features or
video services. This feature is optional.
One of the following methods can be used HTTP, TFTP, and USB.
This option resets the SMT-i5243 to factory default settings.
This option reboots the SMT-i5243 phone.
Home Page
17
Hide quick links:
Advertisement
Chapters
Table of Contents
