Conference Button; Transfer Button; Hold Button; Speaker Button - Samsung OfficeServ SMT-i5243 User Manual

CONFERENCE BUTTON

The CONFERENCE button allows the user to set up a call with up to 5 parties (sta-
tion or trunk).

TRANSFER BUTTON

Transfer is used to send any call to another extension in one of two ways. You can
do a screened transfer by informing the other extension who is calling or you can
do a blind transfer without notification.

HOLD BUTTON

The HOLD button maintains the call at your keyset, while enabling you to call
other stations or consult coworkers in confidence.

SPEAKER BUTTON

The SPEAKER button allows you to have a conversation from the keyset without
lifting the handset.
NAVIGATION BUTTON
The ITP-5121D keyset incorporates a NAVIGATION button. This button is
designed to assist the user in activating and using various station features, more
easily. These features include:
• Outgoing Call Log
• Incoming Call Log
• Speed Number Search
• Name Search
• Call Forward Assign
• Alarm Assign
With the NAVIGATION button the station user is no longer required to enter sta-
tion level programming to activate these frequently used features. A few button
presses and these features are activated.
The NAVIGATION button is divided into separate feature buttons. These buttons
are described below.
• MENU BUTTON: This button displays the station feature main menu so that
the users can easily utilize various settings and helpful functions.
4
• SEND BUTTON: If the station is programmed for Enblok Dial Mode, when
dialing an outside telephone number or internal station number, you must
press the SEND button to initiate the call. This button is also used when
reviewing recently received or called numbers and answering incoming calls.
When reviewing recently received calls, continue to press the SEND button
for more than 2 seconds and the last outside number called will be redialed.
The SEND button operates as the ANS portion of the ANS/RLS button. An
ANS/RLS button may be assigned to the station as a programmable button.
• ENTER BUTTON: This button is used to select a menu option, or to save
changes made to a menu or submenu option.
• DIRECTION BUTTON: The DIRECTION BUTTON is the donut shaped ring,
which surrounds the ENTER button. This button is used to navigate within
the menus.There are directional arrows stenciled into this button, which indi-
cate which direction the cursor will be moved.
• END BUTTON: This button is used to disconnect a call after a conversation or
to move to the initial screen.
The END button operates as the RLS portion of the ANS/RLS button. An
ANS/RLS button may be assigned to the station as a programmable button.
• CANCEL BUTTON: This button is used to erase any characters or numbers
entered by the dial pad or to move to the previous screen.
FEATURE ACCESS CODES
This user guide is written based on the default access code for using system fea-
tures. If the system numbering plan has been changed some of the access codes
may not be correct. Your installing company can inform you of the correct codes.
Home Page
5