System Programming From The Programming Telephone - Inter-Tel EncoreCX Installation And Maintenance Manual

System Programming from the Programming Telephone

You access all the System Programming options via the PROGRAM key on the digital telephone set connected
to the programming extension, extension 20 at power up.
1. From the Programming extension, press the PROGRAM key.
2. Press the Scroll Down key (î) until "System Programming" is displayed.
3. Select "System Programming".
NOTE: Selecting "System Programming" from any extension other than the programming extension will result
in the prompt "Programming Refused" being displayed.
The following screen is displayed:
•
Enter the System Programming Password, which is 1111 by default.
NOTE: You can also enter System Programming by dialing ##1111 at the programming extension and selecting
"Send Digits".
The following screen appears offering options to configure the overall system, the extensions, or the lines.
•
Under "System", you will find the programming options that affect the system as a whole.
•
Under "Extensions", you will find the programming options that affect the extensions.
•
Under "Lines", you will find the programming options that affect the incoming lines.
Enter System Password
- Exit
Select Option
- System
- Extensions
- Lines
Installation and Maintenance Manual
EncoreCX
71