Navcom Page - Garmin GNS 530 Pilot's Manual & Reference

TAKEOFF TOUR

NAVCOM Page

The Navigation/Communications (NAVCOM)
Page provides a complete list of airport fre quen cies
at your departure, en-route and arrival airports.
To place a frequency from this list on standby,
highlight the desired frequency and press ENT.
To display frequencies for a different airport along
your fl ight plan, press the small right knob to
highlight the airport iden ti fi er fi eld. Rotate the
small right knob to display the list of airports
within your fl ight plan. Continue rotating the
small right knob to select the desired airport and
press ENT.
14
To display the frequency list for the desired fl ight plan or direct-to airport:
1. Push the small right knob to activate the cursor on the airport identifi er fi eld (in the GPS window).
2. Rotate the small right knob to display the list of airports (departure, arrival and en route) for your fl ight plan
or direct-to. Continue to rotate the small right knob until the desired airport is selected.
3. Press ENT to display the frequency list for the selected airport.
Arrival, Enroute
or Departure Airport
A frequency listed on the NAVCOM Page can be quickly transferred to the standby fi eld of the COM or
VLOC windows. This time saving process prevents having to "re-key" a fre quency already displayed else where
on the screen.
To select a communication or navigation frequency:
1. Push the small right knob to activate the cursor in the GPS window.
2. Rotate the large right knob to select the desired frequency from the list.
3. Press ENT to transfer the selected frequency to the standby fi eld in the COM or VLOC win dow. COM fre quen -
cies automatically go to the standby fi eld of the COM window and navigation frequencies au to mat i cal ly go to
the standby fi eld of the VLOC window, regardless of the window currently highlighted by the cursor.
4. To activate the selected frequency, press the COM or VLOC fl ip-fl op key.
NAVCOM PAGE
Frequency List