Navcom Page; Navigation Diagram - Garmin GNC 300 Pilot's Manual

REFERENCE
TAKEOFF TOUR
Nearest Airport Info &

NAVCOM Page

Navigation Diagram

CDI page with 'trn' and 'trk' displayed.
CDI page with 'brg' and 'trk' displayed.
NAVCOM Page
6
In addition to the destination field and graphical CDI, the GNC 300 CDI page fea-
tures four selectable fields for various navigation data so that the page may be config-
ured to your own preferences (see Section 1 for more information). The default set-
tings for the CDI page are:
• Ground Speed (gs)— Your present speed over the ground in knots
• Distance (dis)— The distance to your destination in nautical miles
• Track (trk)— Your present course over the ground
• Estimated Time Enroute (ete)— The time to your destination based
upon your present speed and course in hours and minutes
The next page available under the GNC 300' s NAV key is the navigation commu-
nications (NAVCOM) page. It provides you with a complete list of airport frequen-
cies at your departure and arrival airports, allowing convenient selection of every fre-
quency you'll need along your flight path. If you do not have an active direct-to desti-
nation, the navigation communications page will display the frequencies for the airport
nearest your present position.
To view the NAVCOM page from the CDI page, rotate O one stop to the right.
The NAVCOM page lists your departure and arrival airports on the left side of the
page, with all the database frequencies listed in a column down the right side of the
page. To scroll through the list of frequencies, simply rotate the inner knob (
direction of the arrow prompts at the bottom left of the page.
To place a frequency from the list in the standby field:
C
1. Press the key twice to activate the cursor in the GPS window.
O
2. Use the knob to select the desired frequency. Press
standby field. The cursor will automatically advance to the next frequency on the list.
K
) in the
E
to place the frequency in the