Airport Frequency Page - Garmin GNS 400W Pilot's Manual & Reference

6 - WPT PAGES
Airport Frequencies
The following descriptions and abbreviations are
used on the airport runway page:
Airport Identifier,
Symbol and Type
Frequency Type
Usage Restrictions
Information
in WPT group
• T ype— U sage type: Public, Military, Heli-
port, or Private
• Surface— R unway surface types include: Hard,
Turf, Sealed, Gravel, Dirt, Soft,
Unknown or Water
• Lighting— R unway lighting types include:
No Lights, Part Time, Full Time,
Unknown or Frequency (for pilot-
controlled lighting)
Airport Runway Page Options
Select Next FPL Apt?
As described earlier in this section.
Select Destination Apt?
As described earlier in this section.
122
Scroll Bar
Frequency
Third Page
190-00356-00 Rev G

Airport Frequency Page

The airport frequency page displays radio frequen-
cies and frequency types for the selected airport, as
well as sector and altitude restrictions (where appli-
cable). If the selected airport has a localizer-based
approach, the localizer frequency(s) is also listed on
the airport frequency page. The airport frequency page
may be used to quickly select and tune a COM or
VLOC frequency.
To scroll through the frequency list and tune to a
desired frequency on the list:
Press the small right knob to activate the
1.
cursor.
2. Turn the large right knob to scroll through the
list, placing the cursor on the desired frequency.
If there are more frequencies in the list than can
be displayed on the screen, a scroll bar along
the right-hand side of the screen will indicate
where you are within the list.
Press ENT to place the selected frequency
3.
in the standby field of the COM or VLOC
window.