Airport Frequency Page - Garmin GNS 530 Pilot's Manual & Reference

SECTION 7
WPT PAGES

7.4 AIRPORT FREQUENCy PAGE

The Airport Frequency Page displays radio frequencies
and frequency types for the selected airport, as well as
sector and altitude restrictions (where applicable). If
the selected airport has a localizer-based approach,
the localizer frequency(ies) is also listed on the Airport
Frequency Page (Figure 7-13). The Airport Frequency
Page may be used to quickly select and tune a COM or
VLOC frequency.
To view frequency information for a particular airport
on the Airport Frequency Page, enter the Airport' s
Identifier per Section 7.1.
Frequency Airport Identifier,
Type Symbol, and Type
Usage
Restrictions
Information
Position of
Current Page
within Current
Page Group
Current
Page Group
Figure 7-13 Airport Frequency Page
Scrolling through the frequency list and
tuning to a desired frequency on the list:
1) Press the small right knob to activate the
cursor.
Turn the large right knob to scroll through the
2)
list, placing the cursor on the desired frequency
(Figure 7-14). If there are more frequencies in
the list than can be displayed on the screen, a
7-8
Frequency
Scroll
Bar
Number of Pages in
Current Page Group
GNS 530(A) Pilot's Guide and Reference
scroll bar (Figure 7-13) along the right-hand
side of the screen indicates the cursor's position
within the list.
Figure 7-14 111.55 Highlighted
Press the ENT Key to place the selected
3)
frequency in the standby field of the COM or
VLOC Window (Figure 7-15).
VLOC
Standby
Field
Figure 7-15 111.55 Moved to Standby Field
4) To remove the flashing cursor, press the small
right knob.
Some listed frequencies may include designations for
limited usage, as follows:
• 'TX' - Transmit only
• 'RX' - Receive only
• 'PT' - Part time frequency
190-00181-00 Rev. H