Using Sp Mode; Memory Clear - Ricoh B867 Manual

Using SP Mode

4.5 USING SP MODE

4.5.1 MEMORY CLEAR

Network Enabled Machine
A machine with the optional controller box stores the engine data in the NVRAM on the
BICU, and stores the other data in the NVRAM on the optional controller. To distinguish
between the engine data and the other data, see SP5-801-003 through 019. This service
program (SP5-801) handles the controller data. Any data that is not handled by SP5-801 is
the engine data. The data in the BICU NVRAM (engine data) is cleared by SP5-998-001
while the data in the controller NVRAM (controller data) is cleared by SP5-801-xxx (for
exceptions, see "").
Machine Data
Engine data
GW
Controller
data
Exceptions
SP5-998-001 clears most of the settings and counters stored in the NVRAM on the BICU
(the values return to their default values). However, the following settings are not cleared:
SP5-807 (Area Selection)
SP5-811-001 (Serial Num Input [Code Set])
SP5-811-003 (Serial Num Input [ID2 Code Display])
SP5-812-001 (Service TEL [Telephone])
SP5-812-002 (Service TEL [Facsimile])
SP5-907 (Plug & Play)
SP7 (Data Log)
SP8 (History)
B867
NVRAM Cleared by
BICU SP5-998-001
Controller SP5-801-xxx
116
Remarks
Any data other than controller
data
SCS, IMH, MCS, Copier
application, Fax application,
Printer application, Scanner
application, Web service/network
application, NCS, R-Fax, DCS,
UCS
SM