Ricoh B867 Manual page 46

Service Call Conditions
The software attempted to
perform an unexpected
operation. However, unlike
SC990, the process can keep on
running.
Undefined error
An error not controlled by the
992 B
system occurred (the error does
not come under any other SC
code).
Application function selection error
The application selected by a key
997 C
press on the operation panel
does not start or ends
abnormally.
Application start error
After switching the machine on,
998 B
the application does not start
within 60 s. (No applications start
or end normally.)
B867
Logged only; the machine can
continue to operate
Defective software program
Software for that application is
defective
An option required by the
application (RAM, DIMM, board)
is not installed.
Too complicated nest of the fax
group address
1. As for the fax operation problem,
simplify the nest of the fax group
address.
Software for that application is
defective
An option required by the
application (RAM, DIMM, board)
is not installed.
1. Check the setting of
SP5875-001. If the setting is set
to "1 (OFF)", change it to "0
(OFF)".
36 SM