Ricoh B867 Manual page 86

SP Mode Tables
[0 to 32 / 0 / 1 /step]
Compl Opt4
Use this SP to set the conditions for password entry to access the local
address book. Specifically, this SP limits the password entry to symbols and
defines the length of the password.
065
[0 to 32 / 0 / 1 /step]
091 FTP Auth Port Setting
094 Encryption Stat
[Web Service]
SP5848-1 sets the 4-bit switch assignment for the access control setting.
5848
Setting of 0001 has no effect on access and delivery from Scan Router.
ac: Access Control
004 ac: UD (only Lower 4 bits)
007 ac: Log Fax (Lower 4 bits)
009 ac: Job Ctrl (Lower 4 bits)
ac: Device Management
011
(Lower 4 bits)
B867
This SP does not normally require adjustment.
This SP is enabled only after the system administrator has set up a
group password policy to control access to the address book.
This SP does not normally require adjustment.
This SP is enabled only after the system administrator has set up a
group password policy to control access to the address book.
Specifies the FTP port for getting a distribution
server address book that is used in the
identification mode.
[0 to 65535 / 3671 / 1 /step]
Shows the status of the encryption function for
the address book data.
CTL -
Switches access control on and off.
0000: No access control
0001: Denies access to DeskTop Binder.
76 SM