Ricoh B867 Manual page 75

Error Caused by
Response from
GW URL
Instl Clear
209
Releases a machine from its embedded RCG setup.
Print Com Log
250
Prints the communication log.
5821 [NRS Address]
001 CSS-PI Device
SM
Attempted registration without execution of an
-12003
inquiry and no previous registration.
Attempted setting with illegal entries for
-12004
certification and ID2.
Attempted dial up overseas without the correct
-2385
international prefix for the telephone number.
-2387 Not supported at the Service Center
-2389 Database out of service
-2390 Program out of service
-2391 Two registrations for same device
-2392 Parameter error
-2393 External RCG not managed
-2394 Device not managed
-2395 Box ID for external RCG is illegal
-2396 Device ID for external RCG is illegal
-2397 Incorrect ID2 format
-2398 Incorrect request number format
Sets the PI device code. After you change this
setting, you must turn the machine off and on.
65
SP Mode Tables
B867