Ricoh B867 Manual page 83

Enables or disables the prevention function for the continuous data sending.
5846 [UCS Settings]
Machine ID (Delivery Server)
Displays the unique device ID in use by the delivery server directory. The
001
value is only displayed and cannot be changed. This ID is created from the
NIC MAC or IEEE 1394 EUI. The ID is displayed as either 6-byle or 8-byte
binary.
Machine ID Clear (Delivery Server)
Clears the unique ID of the device used as the name in the file transfer
002
directory. Execute this SP if the connection of the device to the delivery
server is unstable. After clearing the ID, the ID will be established again
automatically by cycling the machine off and on.
Maximum Entries
003 Changes the maximum number of entries that UCS can handle.
If a value smaller than the present value is set, the UCS managed data is
cleared, and the data (excluding user code information) is displayed.
Delivery Server Retry Timer
006
Sets the interval for retry attempts when the delivery server fails to acquire
the delivery server address book.
Delivery Server Retry Times
007
Sets the number of retry attempts when the delivery server fails to acquire the
delivery server address book.
Delivery Server Maximum
Entries
008
Sets the maximum number account entries of the delivery server user
information managed by UCS.
SM
0: Disable, 1: Enable
CTL -
Displays ID
Clears ID
[150 to 999 / 150 / 1 /step]
[0 to 255 / 0 / 1 /step]
[0 to 255 / 0 / 1 /step]
[200 to 999 / 200 / 1/step]
73
SP Mode Tables
B867