Ricoh B867 Manual page 85

Printer/scanner unit
Table of Contents

Advertisement

After you do this SP, go out of the SP mode, and then turn the power
off. Do not remove the SD card until the Power LED stops flashing.
Search Option
This SP uses bit switches to set up the fuzzy search options for the UCS local
address book.
060
Bit0: Checks both upper/lower case characters
Bit1: Japan only
Bit2 to 7: Not used
Compl Opt1
Use this SP to set the conditions for password entry to access the local
address book. Specifically, this SP limits the password entry to upper case
and sets the length of the password.
062
[0 to 32 / 0 / 1 /step]
This SP does not normally require adjustment.
This SP is enabled only after the system administrator has set up a
group password policy to control access to the address book.
Compl Opt2
Use this SP to set the conditions for password entry to access the local
address book. Specifically, this SP limits the password entry to lower case
and defines the length of the password.
063
[0 to 32 / 0 / 1 /step]
This SP does not normally require adjustment.
This SP is enabled only after the system administrator has set up a
group password policy to control access to the address book.
Compl Opt3
064 Use this SP to set the conditions for password entry to access the local
address book. Specifically, this SP limits the password entry to numbers and
defines the length of the password.
SM
75
SP Mode Tables
B867

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents