Ricoh B867 Manual page 105

These SPs count the total number of large pages input with the scanner
for scan jobs only. Large size paper (A3/DLT) scanned for fax transmission
are not counted.
ADF Org Feeds
8 221
These SPs count the number of pages fed through the ADF for front and
back side scanning.
001 Front
002 Back
When 1 sheet is fed for duplex scanning the Front count is 1 and the Back count is 1.
If a jam occurs during the job, recovery processing is not counted to avoid double
counting. Also, the pages are not counted if the jam occurs before the first sheet is
output.
8 281 T:Scan PGS/TWAIN
SM
These counters are displayed in the SMC Report, and in the User
Tools display.
CTL [0 to 9999999 / 0 / 1]
Number of front sides fed for scanning:
With an ADF/ARDF that can scan both sides simultaneously, the
Front side count is the same as the number of pages fed for either
simplex or duplex scanning.
With an ADF/ARDF that cannot scan both sides simultaneously,
the Front side count is the same as the number of pages fed for
duplex front side scanning. (The front side is determined by which
side the user loads face up.)
Number of rear sides fed for scanning:
With an ADF/ARDF that can scan both sides simultaneously, the
Back count is the same as the number of pages fed for duplex
scanning.
With an ADF/ARDF that cannot scan both sides simultaneously,
the Back count is the same as the number of pages fed for duplex
rear-side scanning.
CTL These SPs count the number of pages
95
SP Mode Tables
B867