Ricoh B867 Manual page 76

SP Mode Tables
002 RCG IP Address
5824 NVRAM Upload
001 (
"NVRAM Upload")
5825 NVRAM Download
001 (
"NVRAM Download")
5828 [Network Setting]
1284 Compatibility
050
(Centro)
052 ECP (Centro)
065 Job Spooling
Job Spooling Clear: Start
066
Time
069 Job Spooling (Protocol)
B867
Sets the IP address of the RCG (Remote
Communication Gate) destination for call
processing at the remote service center.
[00000000h to FFFFFFFFh/1]
CTL
Enables or disables 1284 Compatibility.
[0 or 1 / 1 / 1 / step]
0: Disabled, 1: Enabled
Enables or disables ECP Compatibility.
[0 or 1 / 1 / 1 / step]
0: Disabled, 1: Enabled
NOTE: This SP is activated only when
SP5-828-50 is set to "1".
Enables/disables Job Spooling.
[0 or 1 / 0 / 1 / step]
0: Disabled, 1: Enabled
Treatment of the job when a spooled job exists at
power on.
0: ON (Data is cleared)
1: OFF (Automatically printed)
Validates or invalidates the job spooling function
for each protocol.
0: Validates
66 SM