Ricoh B867 Manual page 67

The certification update request has been received from the GW URL,
the GW URL was notified of the results of the update after it was
17
completed, but a certification error has been received, and the rescue
certification is being recorded.
The rescue certification of No. 17 has been recorded, and the GW URL
18
is being notified of the failure of the certification update.
Cer Abnml Cause
Displays a number code that describes the reason for the request for update
of the certification.
0 Normal. There is no request for certification update in progress.
Request for certification update in progress. The current certification
1
has expired.
068
An SSL error notification has been issued (after the certification has
2
expired).
Notification of shift from a common authentication to an individual
3
certification.
4 Notification of a common certification without ID2.
5 Notification that no certification was issued.
6 Notification that GW URL does not exist.
Cert: Updtt ReqID
069
The ID of the request for certification.
Firm Updating
083
Displays the status of the firmware update.
Firm Up Usr Conf
085
This SP setting determines if the operator can confirm the previous version of
the firmware before the firmware update execution. If the option to confirm the
SM 57
SP Mode Tables
B867