Duplex Printing - Ricoh B867 Manual

Controller Functions
Output Tray Selected
If an output tray is specified by the driver, it overrides the default tray setting in User
Tools.
If the machine cannot print to the selected output tray, it prints to the default paper
output tray.
If the mailbox unit is installed, paper larger than B4 cannot be output to the standard
(internal) tray.
If paper overflow is detected at the selected output tray, the controller stops printing
until the overflow detector indicates that the tray is no longer full.
Sequential Stacking
When the nine-tray mailbox is selected as the output tray and "Printer Default" is specified
as the output tray in the driver, the machine automatically sends the output to the top tray
(1st tray). When that tray fills up, the machine sends the output to the next tray.
This feature is called "Sequential Stacking."
If a tray becomes full and the next tray is also full, the machine displays an error and
stops printing.
When the paper in the next tray is removed, the machine automatically resumes
printing to the next tray.
If all trays become full (overflow detected in all trays), the machine displays an error
and stops printing. This time, all paper in all trays must be removed.

5.2.4 DUPLEX PRINTING

Duplex printing is available with all output bin options but not all paper sizes. If a job
specifies duplex printing but the paper size to be used cannot be used by the duplex unit,
the job will be printed single-sided.
When the by-pass feeder is selected as the paper source, duplex printing is
automatically disabled.
B867 132 SM