Ricoh B867 Manual page 99

7807 [Reset–SC/Jam Counters]
Resets the SC, paper, original, and total jam counters. When the program
ends normally, the message "Completed" is displayed. SP 7807 1 does not
7807 1
reset the following logs: SP 7507 (Display-Paper Jam History) and SP 7508
(Display-Original Jam History).
[MF Error Counter] Japan Only
7826
Displays the number of counts requested of the card/key counter.
001 Error Total
002 Error Staple
[MF Error Counter Clear]
7827
Press Execute to reset to 0 the values of SP7826. Japan Only
7832* [Display-Self-Diag]
Displays the SC codes and the number of their occurrences. Each number is
7832 1
in the range of 0 to 9999.
[Resident Memory]
7836
Displays the contents of the memory on the controller board.
[Assert Info]
7901
Records the location where a problem is detected in the program. The data
SM
A request for the count total failed at power on. This
error will occur if the device is installed but
disconnected.
The request for a staple count failed at power on.
This error will occur if the device is installed but
disconnected.
89
SP Mode Tables
B867