Usb Host Installation - Ricoh B867 Manual

Controller Options
Remove the interface cover [A] (    x 2).
1.
Install the Wireless adaptor in interface slot A [B] (    x 2).
2.
3. Select an appropriate FCC label from the FCC sheet, and then attach the FCC
label to the non-label side of the Bluetooth card.
4. Install the Bluetooth card in the wireless adaptor.
5. Attach the antenna cap to the Bluetooth card.
6. Turn on the main power switch.
7. Print out the configuration page (User Tools/ Counter > Printer Features > List/
Test Print), and then check that this device is detected.

1.2.7 USB HOST INSTALLATION

Component Check
No. Description
1 USB Host Interface Ass'y
2 USB Cable
3 Ferrite Core
4 Clamp
5 UL Sheet
B867 14
Q'ty
1
1
1
1
1
SM