Ricoh B867 Manual page 13

4. Connect the controller box [E] to the BICU. Make sure that the BICU is not damaged
[F] and that the three openings [G][H][I] hold the controller box.
5. Fasten the screws ( x 7 [including the screw [C]).
6. Remove the FCU cover [J] ( x 3).
Step 2–Printer/Scanner
1. Remove the controller-box cover [A] ( x 7).
2. Install the RAM DIMM [B].
3. Remove the SD-card cover [C]
( x 1).
4. Install the SD card [D] in the lowest slot.
5. Install the SD-card cover.
SM
Controller Box and Printer/Scanner
3 B867