Settings - Ricoh B867 Manual

Controller Box and Printer/Scanner
Step 6–Printer/Scanner Keys
1. Remove the dummy cover (from the basic operation panel) and install the
printer/scanner key panel [A].
2. Install the dummy fax cover [B].

1.1.4 SETTINGS

Step 9–Printer/Scanner Model Settings
1. Turn the main switch on.
2. Start the SP mode.
3. Select SP5-985-001 (NIC setting) and change the setting value to "1" (ON).
4. Select SP5-985-002 (USB setting) and change the setting value to "1" (ON).
5. Turn the main switch off and on.
6. Start the SP mode.
7. Select SP5-801-001 and initialize the all SP data.
8. Exit the SP mode, and then start the UP mode.
9. Select the "@Remote Service" ("User Tool" > "System Settings > Administrator Tools"
> "Extended Security" > @Remote Service") and select "Prohibit".
10. Exit the UP mode, and then start the SP mode.
11. Select SP5-870-003 and execute initialization for @Remote.
12. Select SP5-907-001 and specifies the "Plug & Play".
13. Select SP5-870-001 and execute writing certification for @Remote.
14. Select SP5-302-002 and specify the time zone.
15. Select SP5-307-001, 003, and 004 and specify the daylight-saving time settings.
16. Exit the SP mode.
17. Turn the main switch off and on.
18. Start the UP mode.
B867 6 SM