Installation Procedure - Ricoh B867 Manual

Controller Options

Installation Procedure

Remove the interface cover [A] (    x 2).
1.
Install the modem board into interface slot A [B] (    x 2).
2.
3. Confirm the following SP settings before starting installation flow.
SP5-985-001 ("On Board NIC" is set to "0: OFF".)
SP5-816-150 (To Select the country)
SP5-816-154 (To set an outside connection telephone number)
SP5-816-161 (To set a telephone number)
4. Follow the Installation flow as shown below with SP mode.
B867 16 SM