Ricoh B867 Manual page 131

To select an item on the LCD screen, press the appropriate key on the operation panel,
or press the appropriate number key on the 10-key pad of the operation panel.
Before starting the firmware update procedure, always make sure that the machine is
disconnected from the network to prevent a print job for arriving while the firmware
update is in progress.
Firmware Update Procedure
Before beginning the following, first confirm which firmware version(s) are
currently installed in the machine with SP7-801-255.
SD Card Preparation
1. Format an SD card with, for example, SD Formatter v1.1.
1. Create a "romdata" folder on the card.
2. Create the following folders within the "romdata" folder: B245, B268, B276, B277, etc.
3. Download the firmware from the server and store the files in the folder with the
corresponding model code on the SD card.
Example:
File B2455540B should be stored in the "B245" folder, whereas files B6585902B,
B6585903B, and B6585905B should be stored in the "B658" folder.
Firmware Update
It is strongly recommended to store only B245/B276/B277 files on SD cards used
for downloading to B245/B276/B277. With the controller used on this model, a
firmware update may sometimes be interrupted if there is software for multiple
models stored on the same SD card.
SM 121
Using SP Mode
B867