Engine Sp Mode; Sp1-Xxx (Paper Handling) - Ricoh Bc-C1 Field Service Manual

5. System Maintenance

Engine SP Mode

SP1-XXX (Paper Handling)

1001 [Sub Registration]
Leading Edge Registration Adjustment
(Tray Location, Paper Type, Color Mode), Paper Type: Plain, Middle Thick, Thick
Adjusts the leading edge registration by changing the registration motor operation
timing for each mode.
Increasing a value: an image is moved to the trailing edge of paper.
Decreasing a value: an image is moved to the leading edge of paper.
1-001-002 Tray: Plain
1-001-003 Tray: Mid Thick
1-001-004 Tray: Thick
1-001-007 Bypass: Plain
1-001-008 Bypass: Mid Thick
1-001-009 Bypass: Thick
1-001-013 Duplex: Plain:
1-001-014 Duplex: Mid Thick
1-001-015 Duplex: Thick
1002 [Main Registration]
Adjusts the printing side-to-side registration from each paper feed station, using the
"Test Page" in the [User Tools]. Adjustments are supported for all five possible feed
trays (including optional trays).
1-002-001 By-pass
1-002-002 Tray Main1
1-002-004 Tray Bank1
1-002-005 Tray Bank2
148
*ENG [-9.0 to 9.0 / 0.0 / 0.1 mm / step]
*ENG [-9.0 to 9.0 / 0.0 / 0.1 mm / step]
*ENG [-9.0 to 9.0 / 0.0 / 0.1 mm / step]
*ENG [-9.0 to 9.0 / 0.0 / 0.1 mm / step]
*ENG [-9.0 to 9.0 / 0.0 / 0.1 mm / step]
*ENG [-9.0 to 9.0 / 0.0 / 0.1 mm / step]
*ENG [-9.0 to 9.0 / 0.0 / 0.1 mm / step]
*ENG [-9.0 to 9.0 / 0.0 / 0.1 mm / step]
*ENG [-9.0 to 9.0 / 0.0 / 0.1 mm / step]
*ENG [-4.0 to 4.0 / 0.0 / 0.1 mm / step]
*ENG [-4.0 to 4.0 / 0.0 / 0.1 mm / step]
*ENG [-4.0 to 4.0 / 0.0 / 0.1 mm / step]
*ENG [-4.0 to 4.0 / 0.0 / 0.1 mm / step]