Related Sp Mode - Ricoh B867 Manual

USB
been printed at the time of cancellation, the job will continue to print up to the page
where the print job was cancelled
When the controller board is replaced, the host computer will recognize the machine
as a different device.

Related SP Mode

"USB Settings" in the printer engine service mode. Data rates can be adjusted to full speed
fixed (12 Mbps). This switch may be used for troubleshooting if there is a data transfer error
using the high speed mode (480 Mbps).
Data rates can also be adjusted using the UP mode "USB Setting" in the Host Interface in
the System menu. This mode can be accessed only when the "Enter", "Escape", then
"Menu" keys are pressed to enter the UP mode.
B867 144 SM