Ricoh B867 Manual page 81

Specifies the retry times for sending the scanned image data to the deliver
server or SMTP/FTP/NCP/SMB server after sending error.
Delivery Error Display Time
006 Use this setting to determine the length of time the prompt message is
displayed when a test error occurs during document transfer with the NetFile
application and an external device.
Srv IP (Secondary)
008 Specifies the IP address assigned to the computer designated to function as
the secondary delivery server of Scan Router. This SP allows only the setting
of the IP address without reference to the DNS setting.
Delivery Server Model
009 Allows changing the model of the delivery server registered by the I/O device.
0: Unknown, 1: SG1 Provided, 2: SG1 Package,
3: SG2 Provided, 4: SG2 Package
Delivery Svr Capability
Bit7 = 1 Comment information exits
Bit6 = 1 Direct specification of mail address
possible
Bit5 = 1 Mail RX confirmation setting possible
Bit4 = 1 Address book automatic update function
010
exists
Bit3 = 1 Fax RX delivery function exists
Bit2 = 1 Sender password function exists
Bit1 = 1 Function to link MK-1 user and Sender
exists
Bit0 = 1 Sender specification required (if set to 1,
Bit6 is set to "0")
SM
[0 to 999 / 300 / 1 second /step]
Range: 000.000.000.000 to 255.255.255.255
[ 0 to 4 / 0 / 1 /step]
[ 0 to 255 / 0 / 1 /step]
Changes the capability of
the server that is
registered as an I/O
device.
71
SP Mode Tables
B867