Printer Service Mode; Service Mode Table; Sp Modes Related To Printer Controller - Ricoh B867 Manual

4.3 PRINTER SERVICE MODE

4.3.1 SERVICE MODE TABLE

SP No. Description
1001 BitSw#1 Set
1003 Clear Setting
1004 Print Summary
1005 Display Version

4.3.2 SP MODES RELATED TO PRINTER CONTROLLER

The following SP modes are located in the copier SP mode. Refer to section 5.1 of the
main unit service manual.
SP No. Description
A3/DLT Double
5104
Count
5801 Memory All Clear
5907 Plug & Play
SM
Function and Setting
Adjusts bit switch settings.
Note: Currently the bit switches are not being used.
Not used
Prints the service summary sheet
(An error log is printed in addition to the configuration
page).
Displays the version of the controller firmware.
Function and Setting
Specifies whether the counter is doubled for A3/DLT.
0: No, 1: Yes
If  is selected, the total counter and the current user
code counter count up twice when A3 or DLT paper is
used.
Resets data for process control and all software
counters, and returns all modes and adjustments to
their defaults values.
section "Memory Clear" in this chapter for details.
Selects the brand name and the production name for
Windows Plug & Play. This information is stored in
113
Printer Service Mode
B867