Ricoh B867 Manual page 64

SP Mode Tables
008 RCG Connect Timeout
009 RCG Write Timeout
010 RCG Read Timeout
011 Port 80
Function Flag
021 This SP displays the embedded RCG installation end flag.
1: Installation completed
2: Installation not completed
Install Status
This SP displays the RCG device installation status.
022
0: RCG device not registered
1: RCG device registered
2: Device registered
Connect Mode (N/M)
023 This SP displays and selects the embedded RCG connection method.
0: Internet connection
1: Dial-up connection
NotiTime ExpTime DFU
061
Proximity of the expiration of the certification.
062 HTTP Proxy Use
B867
Specifies the connect timeout interval when calling
the RCG.
[1 to 90 / 10 / 1 second/step]
Specifies the write timeout interval when calling the
RCG.
[1 to 100 / 60 / 1 second/step]
Specifies the read timeout interval when calling the
RCG.
[1 to 100 / 60 / 1 second/step]
Enables/disables access via port 80 to the SOAP
method.
[0 or 1 / 0 / – ]
0: Disabled, 1: Enabled
54 SM