Service Tables; Service Program Mode; Enabling And Disabling Service Program Mode - Ricoh B867 Manual

4. SERVICE TABLES

4.1 SERVICE PROGRAM MODE

Before accessing the service menu, do the following:
Confirm that there is no print data in the printer buffer (the 'Data In' LED must not
be lit or blinking).
If there is some data in the buffer, wait until all data has been printed.
The main power LED () lights or flashes while the platen cover or ARDF is
open; while the main unit is communicating with a facsimile or the network server;
or while the machine is accessing the memory for reading or writing data.

4.1.1 ENABLING AND DISABLING SERVICE PROGRAM MODE

Entering the SP Mode

1. Press the Clear Mode key.

2. Use the keypad to enter "107".

3. Hold down Clear/Stop for at least 3 seconds.
4. Enter the Service Mode.
Printer SP
Scanner SP
Exiting the Service Mode
Press the cancel key to exit from the service mode.
SM
Select "Printer SP" to enter printer SP mode.
Select "Scanner SP" to enter scanner SP mode.
37
Service Program Mode
B867