Operating The Pa Fog Horn Mode - Standard Horizon PHANTOM Series PS2000 Owner's Manual

switch to control the AF output level. The AF output
level can be set from 0 to 30 watts.
4. To exit the PA HAIL mode and return to radio opera-
tion mode, press the [ F ] key, followed by the [ 8 ( PA )]
key again.
10.13.2 Operating the FOG HORN Mode
Operator can select from Underway, Stop, Sail, Tow, Aground, Anchor, Horn, or
Siren. Please refer to page 70 for FOG Horn Timing Chart.
CMP25 RAM+ mic:
1. Press and hold down the [ NAV ] key until "
ADRESS " notation appears.
2. Press the [ ] key to select "
the [ CALL ( SET ) MENU ] key to activate the FOG
HORN mode.
3. Press the [
eight functions described above, then press the
[ CALL ( SET ) MENU ] key to activate its function.
4. Press the [ ] or [ ] key to control the monitor (lis-
ten-back) level from the HAIL/PA speaker.
5. On the "Horn" and "Siren" modes, Listen-back the
sound through the HAIL/PA speaker and activate the
tone through the HAIL/PA speaker by pressing the
PTT switch.
Press the [ ] or [ ] key while press and holding
the PTT switch to control the AF output level. The
AF output level can be set from 0 to 30 watts.
6. To exit the FOG HORN mode and return to radio operation
mode, press and hold down the [ NAV ] key again.
VH-310 Handset:
1. Press the [ F ] key, followed by the [ 9 ( FOG )] key, ac-
tivate the FOG HORN mode.
3. Press the [
eight functions described above, then press the
[ ENT ] key to activate its function.
4. Press the [ ] or [ ] key to control the monitor (lis-
ten-back) level from the HAIL/PA speaker.
5. On the "Horn" and "Siren" modes, Listen-back the
Page 34
FOG
] or [ ] key to select the one of the
] or [ ] key to select the one of the
PUBLIC
" menu, then press
Phantom PS2000