10.14.2 Operating the FOG HORN mode
Operator can select from Underway, Stop, Sail, Tow, Aground, Anchor, Horn
and Siren.
1. Press the [ PA/FOG ] key, then select "FOG
CHANNEL selector knob.
2. Press the [ ENT ] key.
3. Turn the CHANNEL selector knob to select the func-
tion.
4. Press the [ ENT ] key.
5. On the HORN and SIREN modes, press the PTT
switch to activate the tone through the HAIL/PA
speaker.
Rotate the CHANNEL selector knob to control the
AF output level. The AF output level can be set from
0 to 30 watts.
6. When the fog signal is not outputted, rotate the VOL/PWR knob to adjust
listen back volume.
7. To exit the FOG HORN mode, press the [ CLR ] key.
GX5000S
FOG" with the
FOG
FOG
FOG
Page 31