Operating The Fog Horn Mode - Standard Horizon Matrix GX2000 Owner's Manual

5. To exit the PA HAIL mode, press the [ CLR ( WX )] key.

10.12.2 Operating the FOG HORN mode

Operator can select from "Underway", "Stop", "Sail", "Tow", "Aground", "An-
chor", "Horn", and "Siren".
1. Press the one of the soft keys momentarily, then
press the [ PA/FOG ] soft key.
2. Rotate the CHANNEL knob to select "FOG
press the [ SELECT ] soft key.
3. Rotate the CHANNEL knob to select one of the eight
functions described above.
4. Press the [ ENT ] soft key.
5. On the "Horn Horn" and "Siren
Horn Horn
Horn
switch to activate the tone through the HAIL/PA
speaker.
Rotate the CHANNEL knob to control the AF output
level. The AF output level can be set from 0 to 30 watts.
6. To listen back (GX2100 only), rotate the PWR/VOL knob.
7. To exit the FOG HORN mode, press the [ CLR ( WX )] key.
GX2000/GX2100
Siren" modes, press the PTT
Siren Siren
Siren
FOG", then
FOG FOG
FOG
Page 41