Operating The Pa Hail Mode; Operating The Fog Horn Mode - Standard Horizon SPECTRUM GX2350S Owner's Manual

FOG HORN mode:
Automatic signaling is transmitted through the PA speaker.

5.11.1. Operating the PA HAIL mode

PUBLIC
ADDRESS
VOLUME
2. Press the PTT switch to speak through the hail speaker.
Rotate the Channel Selector knob to control the AF output level.
The AF output level can be set from 0 to 20 watts.
3. To exit the PA HAIL mode, press any key other than PTT, MEM,
SCAN, H/L, UP, DOWN keys and Channel Selector.
Example : 16/9, WX or CALL SET.

5.11.2. Operating the FOG HORN mode

Operator can select from FOG 1, FOG 2, FOG 3, FOG 4, HORN, SIREN,
AGROUND, or ANCHOR.
FOG 1: POWER BOAT UNDERWAY
FOG 2: POWER BOAT STOPPED
FOG 3: SAIL BOAT, FISH VESSEL, TOW VESSEL
FOG 4: VESSEL UNDER TOW
>FOG1
FOG2
FOG3
FOG4
FOG2
FOG3
FOG4
>SIREN
3. Press the CALL/SET key to operate the FOG HORN mode.
Horn – When PTT is pressed, emits HORN SOUND from the PA speaker.
Siren – When PTT is pressed, emits SIREN SOUND from the PA speaker.
SIREN
VOLUME
5. To exit the FOG HORN mode, press any key other than PTT, MEM,
SCAN, H/L, UP, DOWN keys and Channel Selector.
page 17
1. Press the PA/FOG key.
Toggle between the PA HAIL and FOG HORN
A
mode by pressing the PA/FOG key.
1. Press the PA/FOG key on PA HAIL mode.
Toggle between the PA HAIL and FOG HORN
A
modes by pressing the PA/FOG key.
2. Turn the Channel Selector knob to select the
function.
A
4. On the SIREN and FOG HORN modes, press the
PTT switch to active tone through the PA speaker.
Turn the Channel Selector knob to control the
A
AF output level. The AF output level can be set
from 0 to 20 watts.
Owner's Manual GX2350S