Configuring Msdp; Enabling Msdp; Configuring Default Msdp Peer; Configuring An Originating Rp - Zte ZXR10 5900E Series User Manual

ZXR10 5900E Series User Manual (IPv4 Volume)
Command
ip msdp peer <peer-address>
ZXR10(config)#
connect-source <interface-name>
Command
ip msdp default-peer <peer-address>[list
ZXR10(config)#
<acl-number>]
Command
ip msdp originator-id <interface-name>
ZXR10(config)#
Command
ip msdp mesh-group <peer-address><me
ZXR10(config)#
sh-name>
76 Confidential and Proprietary Information of ZTE CORPORATION

Configuring MSDP

Enabling MSDP

Configuring Default MSDP Peer

When default MSDP peer is configured, the local router accepts all
SA messages from the peer.

Configuring an Originating RP

This command generates the MSDP speaker of SA messages. It
also uses address of specified interface as the RP address in a SA.
Configuring the MSDP Peer as a
Mesh Group Member
A "mesh group" is a group of MSDP speakers. These speakers
have fully meshed connectivity.
Function
This configures an MSDP peer
and enables MSDP.
Function
This configures default MSDP
peer.
Function
This configures an originating
RP.
Function
This configures the MSDP peer
as a mesh group member.