Enable Full Screen Video; Mute Video; Swap Views - Cisco 8811 User Manual

Enable Full Screen Video

Procedure
To display the softkeys, do one of the following actions:
• Press Mute.
• Change the state of the video such as by plugging in the camera.
• Touch the phone screen (Cisco Unified IP Phone 9971 only).
• Press any softkey (Cisco Unified IP Phone 9951 only).
Enable Full Screen Video
Procedure
Step 1 Press Full Screen.
Step 2 Press Minimize to return to the original view.

Mute Video

Mute allows you to block audio input for your handset, headset, and speakerphone, so that you can hear other
parties on the call but they cannot hear you.
When the Separate Audio and Video Mute feature is enabled, you mute the audio but continue to transmit a
video image when you press Mute during a video call. This allows the other parties to see you but not to hear
you. When this feature is disabled, you mute both the audio and the video image when you press Mute during
a video call.
The Separate Audio and Video Mute feature is disabled by default. See your administrator to have it enabled.
Procedure
Step 1 Press Mute Video.
Step 2
Press Unmute Video to unmute the video.

Swap Views

Procedure
Press Swap to toggle between the full-screen view and the picture-in-picture (PIP) view.
Cisco IP Phone 8811, 8841, 8845, 8851, 8851NR, 8861, and 8865 User Guide for Cisco Unified Communications
Manager 11.0
52
REVIEW DRAFT - CISCO CONFIDENTIAL
Basic Operations