Power Settings (Cisco Spa500 Series Or Cisco Spa300 Series Only); Pppoe Settings (Cisco Spa525G Or Cisco Spa525G2 Only) - Cisco 521SG - Unified IP Phone VoIP Administration Manual

Cisco SPA IP Phone Field Reference
System Tab
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
Power Settings (Cisco SPA500 Series or Cisco SPA300
Series Only)
Parameter
PoE Power Required

PPPoE Settings (Cisco SPA525G or Cisco SPA525G2 Only)

Parameter
PPPoE Login Name
PPPoE Login Password
PPPoE Service Name
Description
Specifies the PoE power setting: Normal (default)
or Maximum.
When one or more attendant consoles are
attached to the phone, use Maximum to advertise
to a PoE switch that the phone will consume up to
12 watts.
When no attendant consoles are attached, use
Minimum to advertise a required power budget of
6.5 watts.
This parameter is not applicable to Cisco SPA301
or SPA303 as they do not have Cisco Attendant
Console support.
Description
Specifies the account name assigned by the ISP
for connecting on a Point-to-Point Protocol over
Ethernet (PPPoE) link.
Specifies the password assigned by the ISP for
connecting on a Point-to-Point Protocol over
Ethernet (PPPoE) link.
Specifies the service name assigned by the ISP
for connecting on a Point-to-Point Protocol over
Ethernet (PPPoE) link.
A
225