adept technology GadgetGateway User Manual page 91

Gadget Gateway Web-based Interface
MODE: This displays the current operating mode of the Gateway. To change the Gateway
mode, select the radio button that corresponds to the desired mode and then click the
"Submit Changes" button. The Two possible modes are Manual, and Normal (See
Section 2.1.2, "Gateway Modes of Operation" ).
1. Manual Mode: Use Manual mode when precise control over the Channel List is
desired. In manual mode the user is responsible for the configuration of the Channel
List.
2. Normal Mode: Use Normal mode when the GadgetGateway is being configured by a
remote configuration server. When in Normal mode, ensure that the ConfigServer
Address is correct (see ConfigServer Address below).
Router Name: This field allows the user to set or change the name of the Gateway. A
descriptive name can be used to give the network administrator information on the loca-
tion and use of the Gateway (for example, Name: Gateway Room 34). To change the name
of the Gateway, type the new name into the field provided and click the "Submit Changes"
button.
5.4Router Setup Page
5-5