Change Domain; Change Subnet Forwarding Table - adept technology GadgetGateway User Manual

4.9 709.1 Parameter Menu

4.9.38 Change Domain

Select [2] or [7] from the menu and press ENTER.
Enter New Domain Length
[1] 0 bytes
[2] 1 byte
[3] 3 bytes
[4] 6 bytes
>>>
Select the desired domain length and press ENTER.
Enter New Domain in DECIMAL
[1] byte >>>>
Enter the new domain number and press ENTER. The new domain value will appear in
the menu. For multi-byte domains, a separate prompt will be given for each byte. Setting
the domain length to zero is not supported in version 2.1.

4.9.39 Change Subnet Forwarding Table

Select [3] or [8] from the menu and press ENTER.
GADGET GATEWAY FORWARD LIST MENU
=======================================================
IP Interface Domain[0] Subnet Forward Table
-----------------------------------------------
0 to 31 | 00000000 00000000 00000000 00000000
32 to 63 | 00000000 00000000 00000000 00000000
64 to 95 | 00000000 00000000 00000000 00000000
96 to 127 | 00000000 00000000 00000000 00000000
128 to 159 | 00000000 00000000 00000000 00000000
160 to 191 | 00000000 00000000 00000000 00000000
192 to 223 | 00000000 00000000 00000000 00000000
224 to 255 | 00000000 00000000 00000000 00000000
[C] Clear Entire Table
[S] Set Entire Table
[#] Number 0 to 255 to toggle bit
[P] Previous Menu
>>>
4-26
GadgetGateway Serial Interface