Needed Hardware - adept technology GadgetGateway User Manual

2.3 Needed Hardware

FIGURE 2.7 Multi-cast communications on IP backbone.
To configure the GadgetGateway, you will need:
• A computer with a serial port and a serial communications program (i.e., Windows
HyperTerminal);
• Optionally, once the GadgetGateway is on the IP network, a Web browser can be
used for most of the configuration (i.e., Netscape or Internet Explorer).
2.3 Needed Hardware
The Adept Systems GadgetGateway needs the following hardware.
• Serial Interface Cable
• 5-Volt Power Supply
• ANSI/EIA 709.1 Interface Connector
Up to date documentation and firmware is available on Adept's web site (http://www.gad-
gettek.com/support.psp).
2-8
GadgetGateway Overview