Configuration Server Compatibility Mode; Send Registration To Configuration Server; Ddns Setup Menu - adept technology GadgetGateway User Manual

Table of Contents

GadgetGateway Serial Interface

4.4.14 Conﬁguration Server Compatibility Mode

Select [M] from the menu and press ENTER.

>>> m

Enter Devices Configuration Compatibility Mode:

1 = 852 Compliant Mode

2 = i.LON(TM)ConfigServer Compatibility Mode

3 = Coactive Router-LL(TM) Compatibility Mode

The current versions of both the i.LON conﬁg server and the router-LL conﬁg server were

developed before the ﬁnal version of the ANSI/EIA 852 speciﬁcation was ﬁnalized. Con-

sequently there are variations in how they function. The embedded conﬁguration server in

the GadgetGateway was removed in release 2.x of the ﬁrmware because it had to be

rewritten to support multi-cast. The next major release of the GadgetGateway will include

a compliant conﬁguration server that supports multi-cast. Future versions of the i.LON

conﬁg server may become more compliant and not require the use of the compatibility

mode.

852 Compliant Mode: Select when using a fully 852 compliant conﬁguration server.

i.LON (TM) ConﬁgServer Compatibility Mode: Select when using version 1.x of the

i.LON conﬁguration server.

Coactive Router-LL (TM) ConﬁgServer Compatibility Mode: Select when using the

Router-LL conﬁguration server.

Enter the Conﬁguration Server's Compatibility Mode (1-3) and press ENTER. The new

mode will appear in the menu.

4.4.15 Send Registration to Conﬁguration Server

This item is only displayed in the menu when the router is set to Normal mode.

When 852 bridge mode is enabled there are two conﬁguration servers, one for each of the

bridged channels, that is, far side and near side.

Select [R] from the menu and press ENTER

An 852 registration packet will be sent to both the near side and far side conﬁguration

servers when in 852 bridge mode and to the single conﬁg server when not in 852 bridge

mode. The device should then be recognized by the conﬁg server(s). The device may now

be in the orphans list and have to be further commissioned by the conﬁg server.

4.5 DDNS Setup Menu

To access the DDNS (Dynamic DNS) Setup Menu, select [D] from the GadgetGateway

Setup Menu and press ENTER. The DDNS Setup Menu will appear as follows.

4-15

Table of Contents