Change Channel Name; Change Channel Timeout; Change Channel Address Mode - adept technology GadgetGateway User Manual

4.7 Channel Detail Menu in Manual Mode
[M] Channel Address Mode : UNICAST
Stale Packet Detect
Member List Date Time : Mon Feb 07 06:28:16 2036
---------------------------------------------------------
NAME
---------------------------------------------------------
[000] Adept Gateway
[A] Add New Device to Channel
[D] Delete Device from Channel
[U] Update Channel Member Names
[#] For Details on Member
[P] Previous Menu
>>>

4.7.25 Change Channel Name

Select [N] from the menu and press ENTER.
Enter New Channel Name >>>
Enter the new name for the channel and press ENTER. The new name will appear in the
menu.

4.7.26 Change Channel Timeout

Select [T] from the menu and press ENTER.
Enter Channel Timeout >>>
Enter the new channel timeout value and press ENTER. The the new channel timeout
value will appear in the menu. For IP networks with long delays through IP routers over
the internet the channel timeout many need to be set to some larger value. Version 2.3X or
earlier of the GadgetGateway does not use the Channel Timeout. A default value for the
channel is used instead. This will be changed in a later version.

4.7.27 Change Channel Address Mode

Select [M] from the menu and press ENTER.
Enter Mode:
1 = Unicast Addressing
2 = Multicast Addressing
>>>
4-20
: OFF
| IP ADDRESS
| 10.0.2.95
GadgetGateway Serial Interface
| PORT
| 1628