adept technology GadgetGateway User Manual page 100

Gadget Gateway Web-based Interface
5.6 Channel List Page
Remove: This link removes the device from the channel. This link is only displayed in
Manual mode.
Note: The GadgetGateway that is currently being configured cannot be removed.
Add: This link adds the device to the current channel.This link is only displayed in the
Device List that is shown in manual mode.
Changing the Channel Name
To change the name of the channel, type the new name into the Channel Name field and
then click the "Submit Changes" button. The page will be refreshed and the new name
will be saved.
Changing the Channel Time Out
To change the Time Out of the channel, type the new value into the Channel Time Out
field and click the "Submit Changes" button. The page will be refreshed and the new Time
Out will be saved. Current versions of the firmware do not use the channel timeout. This
may be added in a future release.
Adding a Device to the Channel
To add a new device to the channel, enter the desired information into the three available
fields in the Add New Device table. This information includes the name of the device, the
5-14