adept technology GadgetGateway User Manual page 108

Gadget Gateway Web-based Interface
5.10 Twin Mode Status Page
vated in a standard router. If your device does not support redundant twin mode contact
Adept to find out how redundant twin mode might be activated. Following is a brief
description of each item listed on the page.
Twin Mode Redundancy: This field indicates whether twin mode is enabled or disabled
(on/off).
Alarm/Fault State: This field indicates the status of any alarms or faults.
Failure State: This field indicates the status of any monitoring failures.
Operational State: This field indicates the twin mode operational state.
Flags: This field indicates the twin mode operational state flags for debugging.
Seconds Since Clear: This field indicates the number of seconds since the statistics were
last cleared.
Arb Count: This field indicates this device's arbitration count.
Twin Arb Count: This field indicates the twin's arbitration count.
Total Arbitrations: This field indicates the total number of active state arbitrations.
Forward Rate: This field indicates the rate in packets per second of packets forwarded by
the router in either direction.
5-22