Set Router Mode; Enable 852 To 852 Mode - adept technology GadgetGateway User Manual

GadgetGateway Serial Interface
[L] 709.1/IP Gateway Main Menu
[C] Channel Detail Menu
[Z] 709.1 Parameter Menu
[R] Redundant Twin Menu
[E] Enable 852 to 852 Mode
[T] Tools/Diagnostic Menu
[Q] Reboot GadgetGateway
[S] Save Configuration to Flash
>>>
Hitting return will cause the Main Menu to be re-displayed.

4.3.1 Set Router Mode

Select [M] from the Main Menu and press ENTER. The following dialog will appear.
>>> m
Enter Mode:
1 = Manual
2 = Normal
>>>
Manual Mode: Use Manual mode when precise control over the Channel List is desired.
In manual mode the user is responsible for the configuration of the Channel List. Also use
manual mode when no configuration server is available.
Normal Mode: Use Normal mode when the GadgetGateway is being configured by a
remote configuration server (e.g., i.LON configuration server or the like). When in Normal
mode, ensure that the ConfigServer Address is correct. LonMaker
other nodes in Normal mode.
Make your selection from the list of options and press ENTER. The new router mode will
appear in the menu.

4.3.2 Enable 852 to 852 Mode

Select [E] from the Main Menu and press ENTER. The following dialog will appear.
This Requires a save and reboot
and data will be reset to defaults
Are you Sure You Want to Enable
852 to 852 Mode? (Y/N)
>>>
Enter Y if you wish to enable 852 to 852 bridging mode. This is an optional feature.If it is
not enabled, please contact Adept Systems Inc. to unlock this feature. Enter Y to enable
852 to 852 bridging mode.
The menu item will now display:
D] Disable 852 to 852 Mode
4.3GadgetGateway Main Menu
TM
will only work with
4-7