Set Web User Id And Password; Set Current Date And Time - adept technology GadgetGateway User Manual

4.11 Tools and Diagnostic Menu
4.11.56 Reset 852 Configuration Data
This function should be used after a firmware upgrade or if 852 configuration data ever
becomes corrupted on the GadgetGateway.
To reset the configuration parameters of the 852 protocol to their default status, select [R]
and press ENTER.
For changes to take effect, the Gateway MUST be reset. Upon being reset, the Gateway
will take longer than normal to become operational. This delay is due to the Gateway's
reloading all parameter with default values. The node is reset by cycling the power.

4.11.57 Set Web User ID and Password

To set User ID and password for the Web Interface, select [U] from the menu and press
ENTER.
[U] User Name : adept
[X] Pass Word : *****
[P] Previous Menu
>>>
To change the user name, select [U] and press ENTER.
Enter New User Id >>>
Enter the new user name and press ENTER. The user name will be updated.
To change the user password, select [X] and press ENTER.
Enter New Web PassWord >>>
Enter the new password and press ENTER. The password will be updated and displayed
as stars.
The default user name and password are both blank. This would allow anyone to use the
web interface. Changing the user name and password to something else provides for a lim-
ited amount of security on the web interface.
Note: Changes to the User ID and password will not take effect until the GadgetGateway
has been manually reset.

4.11.58 Set Current Date and Time

Select [T] from the menu and press ENTER.
Enter month (1-12):
Enter the number of the current month and press ENTER.
4-36
GadgetGateway Serial Interface