adept technology GadgetGateway User Manual page 114

GadgetGateway Firmware Upgrade
6.1 Firmware Upgrade Instructions
Follow the same proceedures described in Section 4.2 to set the IP address and port for the
bootloader.
Once IP setup for the bootloader is completed, start the firmware downloader FTP client
application, ftpdl.exe. Once you launch ftpdl.exe the following window will appear:
Select the desired firmware upgrade file (*.bin) from the list which appears on the left side
of the window. You will have to navigate to the directory in which the upgrade file is
located. In the FTP Download window fields listed below, fill in the following informa-
tion:
Unit's IP: The IP address of the Gateway that you are upgrading as displayed in the boot-
loader prompt above not the Gateway IP setup prompt .
User: Leave this set to "(none)"
Password: Leave blank.
Click the Download button to begin the update. The update's progress will appear on the
serial console screen as follows:
Writing Sector [30]
Writing Sector [31]
Writing Sector [32]
Writing Sector [33]
Writing Sector [34]
Writing Sector [35]
Writing Sector [36]
Writing Sector [37]
Writing Sector [38]
Writing Sector [39]
Writing Sector [40]
Writing Sector [41]
6-4