Set Loop Detection Frequency; Statistics Menu - adept technology GadgetGateway User Manual

GadgetGateway Serial Interface
Enter day (1-31):
Enter the number of the current day and press ENTER.
Enter year (xxxx):
Enter the current year and press ENTER.
Enter hour (0-23):
Enter the current hour and press ENTER.
Enter minutes (0-59):
Enter the current minute and press ENTER.
The Date and time will be updated in the GadgetGateway.

4.11.59 Set Loop Detection Frequency

This value determines how often the GadgetGateway tests for loops in the network.
Select [H] from the menu and press ENTER.
Enter New Hz value (seconds) >>>
Enter the new value in seconds and press ENTER. A value of zero disables this feature.
The new value will be updated.
Note: If the Loop Detection finds a loop in the network routing, it will cause the Gadget-
Gateway to go unconfigured. If the Gateway were to remain active, traffic would grow
until bandwidth became prohibitive to communication.

4.11.60 Statistics Menu

The Statistics Menu displays statistics for the Gateway. In the case that 852 Bridge mode
is enabled the 709.1 packets correspond to the near side and the IP packets correspond to
the far side. To access this menu, select [S] from the Tools and Diagnostic Menu and press
ENTER.
GADGET GATEWAY
Statistics
=================================================
Date cleared
Seconds since cleared
Number of channel members
709.1 packets received
709.1 packets sent
: Thu Jan 01 00:00:00 1970
: 21792
: 1
: 0
: 4652
4.11Tools and Diagnostic Menu
4-37